Custom dining table – Dining room should vary widely in size and style. From grand tables that can accommodate dozens to small tables for intimate family dinners, they are an essential part of any home decor. Custom dining tables can be built from almost a combination of wood, metal, glass or plastic. Tables can be fixed dimensions or expanded with magazines to accommodate more guests. A simple dining table can be built from easily accessible materials. Well, instructions for this project are, starting by mark 42 of 52 inches board with an “x” on each of the points that you want to attach a leg.
“x” must go in the middle of the end of 2 of 4. Each leg should be evenly distributed to support the top of the custom dining table and should be near one of the corners of the board. Second, center a 2 x 4 on top of an “x”. Use 3 or 4 stitches for the nail leg of the board. The nails must go from the top of the table into the leg. Repeat the process of the other 3 legs. Third, fill nail holes with wood putty. Use sandpaper to level the putty. Sand the rest of the dining table to eliminate rough spots. Fourth, stain all the dining table, including the legs.
12 Photos Gallery of: To Build Custom Dining Table
The stain may be transparent or colored depending on the desired appearance. Fifth, wait for the stain to dry (about 24 hours) and then apply paint to the dry spot. Lacquer will help convey a deep gloss to your dining table. It will also help to protect and seal wood. Tips and warnings: Experiment with different types of legs and table tops. The legs can be turned or cut. Desk tops may have mitered edges or be oval. If making a longer custom dining table, make sure you have enough legs to carry the weight of the tabletop.