White table lamp – It is always good to recycle or reuse things that have been stored for some time. The combination of elements is infinite. You can make several table lamps with other reusable elements to use in different parts of the house. Remove the bottom of the wooden frame so that you only keep the structure. Decide where you are going to use it and, with the help of the meter, make a mark in the middle on the upper face. There you will make a hole of the diameter of the cable. With great care and making sure to hold firmly the parts that you are going to work, proceed to make a small hole with the drill. Choose a thin bit that allows you to work delicately, but that is wide enough to let the cable through.
Then take the different wooden blocks and mark them symmetrically to also make a hole through them, also the diameter of the cable. When you finish drilling everything, do not forget to give a pass with the sandpaper to eliminate splinters or imperfections. Once everything is properly bored, you can start to assemble your lamp. You can make white table lamp or also a hanging lamp. The choice is yours and the way you combine the elements is completely personal.
12 Photos Gallery of: How To Make White Table Lamp
Set the switch to turn on and off at a convenient distance from the structure and the plug at the other end. If you do not get along with the electricity, you can guide yourself with any tutorial on the internet or ask for help. Your lamp is ready! It is to make white table lamp and how well they look in any corner of the house. Your lamp will look amazing both on a night table, as on a piece of furniture in the living room. The natural finish of the wood is very nice, although you could also dye it before assembling the lamp.